The ANYCUBIC Rigid 100 Resin is a specialized UV liquid resin designed for 3D printing applications requiring high mechanical strength and heat resistance. This 1KG bottle of resin is optimized for use in a wide range of UV-curing 3D printers, making it ideal for creating detailed and durable prototypes, functional parts, and other high-performance applications.

Key Features:

• Outstanding Thermal Resistance: Models printed using Anycubic High-Temperature Resistant Resin exhibit high strength comparable to industrial-grade materials and can withstand temperatures as high as 100°C. The recommended cleaning time for printed models is 6 minutes using 95% ethanol or isopropanol, followed by spraying with a spray bottle for 1 minute. The suggested curing time is 30 minutes under UV light in hot air at 60°C.

• Extra Toughness, Excellent Rigidity: The toughness of this resin is twice that of ordinary standard resin, with an upgraded toughness rating of 90 MPa. This makes it more resistant to deformation under pressure and less likely to be distorted.

• UV Light Curing Increases the Bending Strength by 100%: As UV curing time and temperature increase, the model's rigidity also improves. When set to cure at 80°C for 60 minutes, the bending strength can reach 180 MPa.

• Higher Performance with Photon Mono M7 Pro: Anycubic Photon Mono M7 Pro pairs best with Rigid 100 Resin. The Anycubic M7 Pro 3D Printer features a Dynamic Temperature Control Resin Vat that enhances resin flow and reduces viscosity, ensuring reliable and rapid printing with Anycubic Rigid High-Temp Resistant 100 Resin.

• Low-odor and Pleasant Printing: Anycubic Rigid High-Temp Resistant 3D Printer Resin adopts a low-odor formula, creating a more pleasant printing environment.

Specifications:

• Size:1Kg/1L
• Main material: resin monomer & photoinitiator
• Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
• Solidify wavelength:405nm
• Hardness (D): 79.0
• Viscosity (25 ° C): 552.0 mpa.s
• Liquid density: 1.100 g / cm3
• Solid density: 1.184 g / cm3
• Flexural strength:23.4 Mpa
• Tensile strength: 23.4 Mpa
• Elongation frequency：14.2 %
• Shelf life: 1 year
• Features: UV light will solidify the resin

Precautions:

1. Storage method: Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light)
2. It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
3. Usage: Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight
4. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated
5. Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
6. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
7. Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).