Features:

• High Precision: With this printer resin, printed parts will have high detail with no deformation or noticeable shrinkage and the final cured pieces are strong without being brittle.
• Quick Curing: The UV resins can be rapid prototyping, developed to reduce the forming time.
• Rigid & Toughness: This LCD resin Have good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
• Excellent Fluidity: Able to quickly infiltrate models and cure them into shapes, and tend to be making clean up and post-processing finished pieces much easier.
• Well Packed: The SLA resin bottle comes packaged safely in bubble wrap and cap are completely intact, surrounded by a tight-fitting air pillow. No worries for leakage.

Specifications:

• Size:1Kg/1L
• Main material: resin monomer & photoinitiator
• Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
• Solidify wavelength:405nm
• Hardness (D): 79.0
• Viscosity (25 ° C): 552.0 mpa.s
• Liquid density: 1.100 g / cm3
• Solid density: 1.184 g / cm3
• Flexural strength:23.4 Mpa
• Tensile strength: 23.4 Mpa
• Elongation frequency：14.2 %
• Shelf life: 1 year
• Features: UV light will solidify the resin

Precautions:

1. Storage method: Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light)
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.

2.Usage: Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).