Wash & Cure 3.0 from Anycubic is the perfect 2-in-1 solution for post-processing finished printed resin models. The powerful device with a cleaning capacity of 3 litres is the perfect addition to LCD 3D printers with a size of 7.3 inches or less.

Larger all around for more capacity

Compared to its predecessor, Wash & Cure 2.0, the successor version Wash & Cure 3.0 has a few changes:

• The cleaning capacity has been doubled to 3 litres,
• The total volume of the cleaning basket is now 4 litres,
• The curing size has been increased by 15% to 160 x 180 mm to enable post-processing of larger models or multiple small objects in one pass.

Flexicure Gooseneck Light design and new light source arrangement for more even curing

By using the Flexicure Gooseneck light design, the energy value is increased by 30,000 µW/cm² within an irradiation range of 1-3 cm. The LEDs and lens light source have also been arranged completely differently compared to the previous version, which contributes to more even and thorough curing of otherwise difficult-to-reach areas.

IPA saving design

Wash & Cure 3.0 impresses with a simple and minimalist design with two levels for:

• Basket cleaning mode (165 x 100 x 180 mm),
• Hanging cleaning mode (165 x 100 x 165 mm).

A pearl white housing is complemented by a grey-tinted flip cover. In contrast to the rust-prone metal basket of the previous version, the cleaning basket of the device is made of a rust-resistant PP material. A matching cleaning bucket made of translucent PP material is also part of the contents of delivery.

User-friendly and quiet

The Wash & Cure 3.0 's user-friendly control panel offers three cleaning and curing modes:

• Wash
• Cure
• FlexiCure (curing with gooseneck light)

The control panel is equipped with a touch button and a control button. Each of the modes can be selected with just a single click and can be continuously controlled using the rotary knob (1-30 minutes).

The device is tightly built and software-optimised to reduce noise during washing and curing. The maximum volume in operating mode is < 65 dB.

Other features:

• UV blocking top cover (blocks more than 99.9% of UV radiation),
• Z-axis UV light with a wavelength of 405 nm and 10 piece UV lamp beads,
• Clear PP curing table.

Comparison with V2.0:

Package Included:

• 1 x Anycubic Wash & Cure 3.0
• 1 x Washing Bucket
• 1 x Washing Basket
• 1 x Gooseneck Lamp
• 1 x Hex Key Set
• 4 x Rack Rod
• 1 x Curing Table
• 1 x User Manual
• 1 x Power Adapter