GOOT is a famous brand in Japan. The main effect of BS-10 solder paste is: infiltration effect, remove the oxide, auxiliary heat conduction, reducing the metal surface tension, make solder joint appearance beautiful, and so on.

A surface to be joined that is oily or oxidized will prevent solder from spreading during soldering. This soldering paste removes such oil or oxides and improves wet ability. Assists soldering of electrical wiring and electrical components in hobby kits. This product can be used to get excellent and easy Soldering results for the following:

• Banana Binding posts
• RCA Sockets
• Easy Connects
• All Kinds Of Wire Terminals
• Can be very useful while assembling DIY amplifiers and Preamps

Specifications:

• Model: BS-10
• Net Weight: 50 g
• GOOT BS-10 ointment fluxing, flux-free sour refining, semi-solid is not easy dumping
• Strong flux, solder joints bright, low residue
• It has effect to remove the oxide for the gold-copper alloy substrate
• The flux with stable performance, volatile small, long life cycle, the amount of provincial, non-toxic, odorless, safe and reliable, it is to create high-quality electronic products ideal ancillary products, it is also maintenance engineers supplies.
• For hobby and electronic assembly optimum flux, it does not apply to printed circuit boards.

HOW TO USE:

Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered .Place the soldering iron tip over the leads.Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.

HOW TO CLEAN:

Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion.

CAUTION:

This soldering paste is acidic. Flux residue should be removed to avoid surface corrosion. Not water-soluble.

BS-10 is not suitable for use on PCBs. Applying BS-10 to printed circuit boards could result in electric leakage leading to fire as BS -10 contains electrolyte (a conductive substance).

NOTE: Do not dip the soldering iron tip directly into the soldering paste.

Composition and content:

• Vaseline - 80- 90%
• Zinc chloride - 4- 6%
• Ammonium chloride - 1- 3%
• Paraffin - 6- 9%
• Water - 2-4%