Technical Specifications:

• Resistance at 25 degrees C: 10K +- 5%
• Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
• Thermal cooling time constant <= (in air) 20 seconds
• Temperature Coefficient Type: NTC
• Thermal Time Constant: 10s
• Resistance  10kΩ
• Tolerance: ±5%
• Cable Length: 130mm
• Connector : 16-14mm
• Maximum Power Rating: 75mW
• Maximum Operating Temperature: +150°C
• Minimum Operating Temperature: -80°C
• Application: Compensation, Control, Measurement, etc.

Features:

• Thermistor used for temperature sensing and control.
• Sensor can be installed in various locations with means of a screw (example M2, M3, M4).
• The sensor is not suitable for being permanently in contact with water or liquids.
• The device without connector is suitable for being crimped with terminal, or IDC crimped, or soldered or welded.
• Provide high accuracy in resistance and B-constant
• Product is not containing lead
• Small in size, high-powered, and very capable of bringing
• down the surge current
• Quick in reaction
• High in B value and low in residual current
• Long service life and high reliability
• High coefficient of safety and a wide range of application
• Ring tag eyelets to fit screw mounting;
• Come with broad resistance range
• Thermistor cost is economical
• Provided with lacquer-coated thermistor disk
• Copper leads have coating of tin.
• Having lead spacing of 5.0 mm
• Component remarked with resistance and tolerance
• Good stability, durability in environment