The XDS100v2 is a low-cost JTAG in-circuit emulator for Texas Instruments processors. It interfaces to the host PC via USB2.0 and does not require an additional power supply. Dont forget to download XDS100v2 driver.

XDS100v2 emulator is the second version of the JTAG XDS100 simulation technology, support for all kinds of TI chip debugging. According to the TI original second versions of the XDS100V2 design, support USB2.0 high-speed interface.

Theoretical speed reached 480M/s, through the 14 pin interface for simulation and debugging, support Composer Studio Code (CCS) V4 V3 and V5 to the highest version. It can be used for Windows 2000, XP, Vista, WIN8 WIN7 and other operating systems.

Applications:

• Debugging project
• Develoment project
• Real-time debugging
• ARM-based projects

Features:

• Debug function (connect / disconnect, read/write memory, read the register, load the program, run, stop step, support breakpoint debugging, real-time mode).
• Compatible with Composer Studio Code
• Support JTAG reset, wait reset start mode
• Support power-on reset start mode

Product features:

• USB2.0 high speed interface (480 Mbit/s)
• 14PIN standard JTAG interface, support TI chip processor
• Support for a variety of processors: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, Cortex R4 ARM, Cortex A8/A9 ARM,Cortex M3/M4 ARM and so on
• Support power-off detection
• Support a variety of FTDI device driver
• Adaptive clock support
• Supported by the Composer Studio V4 Code and a higher version, the latest version of CCS5.5 has been rigorously tested.
• Support LED lights display control USB connection
• Operating system: Windows 2000, XP Windows, vista Windows, Windows 7, Windows 8
• Pin number: 14 Pins

Package Includes:

• 1 x XDS100V2 USB DSP Emulator
• 1 x USB Cable
• 1 x Breadboard Cable